AR-15 .223/5.56 Bolt Carrier Group- Black Nitride (Made in USA)

This is the real deal. 15parts in this assembly with 11 improvements. This assembly is made to last and to perform in the worst conditions. Staked screws, superior black nitride coated interior and exterior. This bolt carrier group is simply amazing. This BCG functions flawlessly with all magazines.
Out standard gas key is designed to fit gas tubes with an outer diameter of .172" to .179". This BCG has been tested by the US Army and fits standard M4s.

Mil SPEC HEAVY DUTY 6 POSITION BUFFER TUBE KIT

6 Position Aluminum 7075 T6 (buffer tube) Machined to Mil Spec Dimensions
NO Kit on the market uses 7075 T6 Aluminum it is stronger and wears less than other buffer tubes
Black Recoil Buffer
4.6 Oz buffer
Mounting Kit Includes:
6 Position Mil-Spec Diameter Carbine Receiver Extension (buffer tube)
Carbine Buffer 4.6 Oz 
Heavy Duty Carbine Buffer Spring
Castle Nut/Receiver Nut
Mil-Spec Receiver End Plate
Will not fit to any Commercial stock only mil-spec stocks

AR15 .223/5.56 Complete Pistol Buffer Tube Kit

Includes:

•         Pistol Buffer Tube

•         Buffer Tube Foam Pad

•         Buffer

•         Buffer Spring

•         Steel End Plate

•         Steel Castle Nut

Detail:

•         CNC machined aluminum buffer tube to fit carbine buffer and spring.

•         Hard anodized type III black finish.

•         Machined lower slot to accept all end plates and sling mounting accessories.

•         Superior Quality Carbine Buffer Spring

•         Standard 3 oz buffer Quality Polyurethane Bumper for longer life

•         Steel Ambidextrous End plate and Castle nut.

•         Buffer tubes measure 7-5/16"

•         Buffer Tube Foam Pad is made from NPVC also known as NBR or Nitrile.

AR-15 AR-10 Mil Spec 6 Position Butt Stock With QD Attachment Sling Swivel

Fits 6-position Receiver Extension Tube - Black Molded from Reinforced Plastic Composite
Mounts on Standard Mil-spec 5.56 / .223 and .308 Carbine Tubes
Friction Locking Mechanism
Integrated Ambidextrous QD Swivel System
This durable, high-impact polymer carbine buttstock is designed for quick and easy adjustment with multiple sling attachment options for your .223/5.56 and .308 hunting rifle.
 

AR15 Dual Ambidextrous Charging Handle with Steel Latch

• Material: 6061 T6 aluminum

• Latches are steel

• Finish: Type III hard-coat anodized

• Perfect replacement for any factory charging handle

• Oversize release levers on both sides

• No gun smith required

• Can be charged in any desired motion

** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **

** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **

AR-15 STAINLESS STEEL BARREL .223 WYLDE 1:8 TWIST

• Length: 16”
  
• Material: 416R stainless steel
  
• Thread Pitch: 1/2x28
  
• Gas Type: Carbine
  
• Twist: 1:8
  
• Chambered: .223 Wylde (compatible with .223 and 5.56)
  
• Feed ramps: M4
  
• This barrel is safe to shoot .223 and 5.56, but can provide a better grouping with the military pressured 5.56
  

          Made in the USA

AR15 Ultra Slim Keymod Handguards W/ Steel Barrel Nut

• Constructed of 7075 T6 Aluminum
  
• Includes 2 Detachable Accessory Rails
  
• Pre-Drilled Steel Barrel Nut
  
• Details:
  
• Fits any AR-15 upper receiver
  
• 7075 T6 Aluminum
  
• Comes with Steel Barrel Nut and 2 Black 32mm Shim/Barrel Nut Washer
  
• 2 x 2 inch length detachable Rails Included
  
• Lightweight
  
• Monolithic top rail is continuous with flat top receiver
  
• 1913 Picatinny rail top
  
• The Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.
  
• length: 15"
  
• Removable rail System
  
• Sectional Rails Can Be Moved To Different Positions
  
• outside Diameter: 1.536"(without Rail)
  
• inside Diameter: 1.36" (without Rail)
  
• Height : 1.98"

AR-15 .223 A2 STAINLESS STEEL BIRDCAGE MUZZLE BRAKE

• Constructed Of Stainless Steel
  
• 1/2 x 28  Thread Pitch
  
• Polished stainless finish
  
• 5 Slots/Solid Bottom
  
• Caliber: .223/5.56
  
• Includes crush washer

AR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.

• High quality and lightweight stripped Upper Receiver
  
• Material: Aircraft grade Aluminum
  
• Finish: Black Anodized
  

Charging Handle

• Body is 6061 T6 Billet Aluminum
  
• Latch is 7075 T6 
  
• Black Type III Hardcoat Anodizing
  

Dust Cover

• Dust Cover, Spring, and Rod are constructed from 4150 Steel
  
• Black Type III Hardcoat Anodizing
  

Forward Assist

• Constructed from 4150 Steel
  
•  Includes Plunger, Forward Assist Pawl, Retainer pin, and spring
  

Gas Block

Specifications:

• Constructed of Steel

• Set screw mounts

• Fits .750 Dia Barrels

• Color: Black Phosphate finish

Gas Tube

• Material: Stainless Steel (optimal heat and corrosion resistance)

• Mil-Spec Dimensions (consistant gas flow)

• Length: 9.75"

• Made in the U.S.